Version History
Here you can find the changelog of Audio Evolution Mobile TRIAL since it was posted on our website on 2014-06-13.
The latest version is 5.3.4.0 and it was updated on soft112.com on 19 April, 2024.
See below the changes in each version:
version 5.3.4.0
posted on 2024-03-19
Solved several issues with the Android MIDI driver.
version 5.3.3.8
posted on 2024-02-26
Solved an issue with older Android devices.
version 5.3.3.6
posted on 2024-02-19
* Added an option 'Ignore other MIDI CCs' to the MIDI input dialog that ignores every incoming MIDI CC except for 1 (mod wheel), 7 (volume), 10 (panning) and 64 (sustain pedal). This can be useful if you don't want certain MIDI CC's that are used for MIDI remote control to change the sound/filters of the Soundfont.
* Added a 'Reset settings' option.
* Importing a Soundfont when memory was very low could fail. Solved.
* Solved an issue with the Yamaha P-225.
version 5.3.3.3
posted on 2024-01-04
* FX grids can now be stored and loaded through the Presets menu.
* The Tempo marker dialog now takes on the time signature and tempo values of the marker directly before the new one being added.
* When leaving the virtual keyboard display when playing, the playback is not stopped anymore.
* The last used parameter in Evolution One, Flowtones or Lowtone is now highlighted when opening the MIDI parameter control dialog.
and more..
version 5.3.3.2
posted on 2023-11-18
* When the ‘Select’ button is active, double-tapping now does not open VTS or enter the piano roll anymore.
* Vertical scrolling on the arranger screen is now restricted such that the last track always remains visible.
* Cut/Copy/Paste buttons are now available in Select mode as well.
* The 'Import' option in the multi-instrument drum pattern sample selection dialog did not work anymore. Solved.
version 5.3.2.6
posted on 2023-09-01
* Attempting to split an audio clip at its start (for example due to the grid setting) could cause an error message that the length of the audio clip was negative or zero. Solved.
* Solved a possible exception message on exit.
version 5.3.2.4
posted on 2023-08-14
* A center pitch bend event is now sent at the start of playback for tracks using a SoundFont.
* Solved an issue with low sample rates in combination with Vocal Tune Studio.
* The save button was disabled in Lowtone. Solved.
version 5.3.2.1
posted on 2023-08-13
* Added the Toneboosters Lowtone synth
* Added 'Output velocity range' to the MIDI input dialog
* Replaced the I (I/O meter) with a Master volume indicator (M)
* Mixdown could crash when multi-core processing was turned on. Solved.
* Using a (pure) MIDI track would crash on MIDI input. Solved.
* Added an option 'Ignore MIDI CC11 for SoundFonts' to the USB MIDI settings so you can use an expression pedal for other purposes.
* Solved a possible crash when 'Save as broadcast WAV' was active.
version 5.3.1.9
posted on 2023-08-05
* Solved a crash in the Clean up project dialog on older Android versions.
* Projects with a USB MIDI track couldn't be saved anymore. Solved.
version 5.3.1.8
posted on 2023-06-20
* Added a 'DYN' mode to the piano roll editor. When active, the length of a note is determined by the visible grid.
* Added a 'DRAW' toggle to the piano roll editor. When active, the length of a note can be 'drawn'.
* Added a 'Ghost tracks' option to the piano roll editor making it easy to align notes with notes of other tracks.
* Added multi-core processing to the settings. Can perform worse than single core (depends on the Android device).
* Added the Toneboosters GonioMeter plug-in
and more..
version 5.3.1.6
posted on 2023-06-16
* New 'Export MIDI' dialog with new options to save in a public folder or share the MIDI file.
* Added a 'Reverse sustain pedal' option to the USB MIDI settings to solve issues with some (Yamaha) pedals that behave reversed.
* Solved an issue with some USB audio interfaces failing to playback or record.
* Solved a possible crash in Vocal Tune Studio when no notes were found.
version 5.3.1.5
posted on 2023-05-13
Solved issue with layout of Load Project dialog.
version 5.3.1.2
posted on 2023-05-10
* Added an option 'Order by date' to the 'Load Project' dialog.
* Added support for USB audio interfaces with a 32-bit floating point mode like the Zoom UAC-232.
* The first note(s) of an instrument track could erroneously play during count-in in some situations. Solved.
and more..
version 5.3.1.1
posted on 2023-04-24
* The pitch of the metronome sound will not change anymore when changing sample rate.
v5310:
* New 'Clean up project' dialog that takes all project files of the project into account.
* MIDI Parameter feedback did not work for busses. Solved.
* Bus volume could only be controlled up to 0dB using MIDI Remote Setup. Solved.
* Vocal Tune Pro now updates its controls after loading a preset or applying automation.
* Added a MIDI remote setup command 'Next button'
and more..
version 5.3.0.9
posted on 2023-02-10
* Solved an issue with the bottom bar scaling returning to 100%.
* Solved an issue with clip selection/actions.
version 5.2.2.0
posted on 2022-05-13
* Added the Toneboosters BitJuggler effect: BitJuggler is the most complete tool to simulate vintage digital processing and recreate digital imperfections. Create that 80's digital sound, add vintage sampler character, simulate lossy audio codecs from the 90's or shape your audio beyond analog simulation.
* Added latency compensation for the Toneboosters VoicePitcher 4.
* Loading a project with a sampler instrument on an instrument track would load the default stereo grand instead. Solved.
version 5.2.1.0
posted on 2022-05-07
* Added the Toneboosters Voice Pitcher V4: TB VoicePitcher 4 is a dual voice pitch shifter with creative freeze effect. Help vocals stand out by adding one or more virtual tracks, with LFO-driven dynamic pitch shift and delay for a more natural doubling effect than a chorus or conventional doublers. The unique freeze option can freeze vowels instantly for creative effects.
* After replacing a drum pattern sound, its reverb parameter would get removed. Solved.
version 5.1.2.6
posted on 2022-03-12
* Solved an issue with 'Playback failed to start' being displayed in the drum pattern editor and piano roll editor under certain conditions.
* When using AudioTrack, arming an audio track and pressing record would not display the input level and audio being recorded anymore. Solved.
version 5.1.2.1
posted on 2022-02-10
* Added the Toneboosters Flowtones virtual analog synthesizer (Android 9+): Flowtones is a modern, unique-sounding virtual analog synthesizer with two parts featuring two analog-modelled VCOs each. Each oscillator has an extensive feature set including pulse width and ring modulation, subharmonic synthesis, noise and unison synthesis and a wide range of modulation options.
* and more..
version 5.1.1.3
posted on 2022-01-25
* Solved an issue with Yamaha MODX synths that was introduced in 5.1.
* Calculation of storage space on export to Portal was incorrect for anything other than internal storage. Solved.
* Solved an issue with TB Compressor V4 presets.
version 5.0.9.0
posted on 2021-10-31
* Added support for the Nux Mighty Plug.
* When a file with a wrong MP3 extension fails to import that was actually a MP4 file, the app will now try to import it as MP4.
* Solved a possible crash when disconnecting an effect block on the second row.
* The -/= zoom keys on a keyboard now also work on the piano roll editor.
version 5.0.9.1
posted on 2021-10-31
* Added support for the ATR2500x-USB mic.
* Added a pop-up menu to project folders in the file browser using which you can zip and share an entire project.
* When replacing a mono audio clip with a stereo clip or when inserting an effect that always outputs stereo and a ToneBoosters V3 effect was on the track that was initialized in mono mode, the app would crash at playback. Solved.
version 5.0.8.8
posted on 2021-10-03
* When replacing a stereo audio clip with a mono clip and a ToneBoosters V3 effect was on the track, the app would crash at playback. Solved.
* Reverted the minimum track height as before.
* Clip automation wasn't saved for MIDI instrument clips, solved.
* Clip automation handles were displayed for pure (non-instrument) MIDI clips. Solved.
* Updated Toneboosters Compressor V4 to the latest code.
version 5.0.8.7
posted on 2021-07-26
* The piano roll now displays the grid lines for triplets when a triplet grid size is chosen.
* Solved issue with vertical zooming and corrected minimum track height for high dpi devices.
* Added Sustain to the MIDI remote control setup events.
* The MIDI remote control events after Decay were mapped to the wrong parameter. Solved.
* In some situations, changing the sample rate after an initial audio recording with a USB audio interface was made, could lead to problems with recording. Solved.
version 5.0.8.4
posted on 2021-07-26
* A 'sustain pedal off' event is now sent to each virtual instrument track before playback in the piano roll editor.
* Fixed crash on older Android versions when pressing Next with the Toneboosters Compressor V4 active.
* Added several keyboard shortcuts.
* Updated Toneboosters Reelbus V4 processing code and added a HQ button.
version 5.0.8.2
posted on 2021-07-20
* CPU usage could get high when using EQs on Android devices with an Intel processor. Solved.
* Added MIDI support for the Yamaha PSR-295.
version 5.0.8.1
posted on 2021-05-26
* Added 'Preferred audio input' and 'Preferred audio output' to the Audio settings which allows you to switch between different microphones and other inputs/outputs should your device support it.
* Changed the 'Audio input' setting to 'Mic preset'.
* The state of the ADSR controls of the virtual keyboard was reset at next playback. Solved.
version 5.0.7.2
posted on 2021-05-13
* Added a 'Ignore sustain pedal' option in the MIDI input dialog to be used with split keyboard functionality: one instrument could for example use the sustain pedal but could be ignored for the other(s).
* The character ':' was accepted in a file name, which could lead to failures or crashes. Solved.
* Modifiers (LFO) for instrument parameters (like Attack) were not correctly saved. Solved.
5.0.7.2:
* The contents of the MIDI input dialog would not scroll on smaller phones. Solved.
version 5.0.7.1
posted on 2021-05-12
* Added a 'Ignore sustain pedal' option in the MIDI input dialog to be used with split keyboard functionality: one instrument could for example use the sustain pedal but could be ignored for the other(s).
* The character ':' was accepted in a file name, which could lead to failures or crashes. Solved.
* Modifiers (LFO) for instrument parameters (like Attack) were not correctly saved. Solved.
version 5.0.5.0
posted on 2021-04-29
* Added the Toneboosters Compressor V4 effect
* Solved 3dB issue in the eco mode of the Toneboosters Reverb V4.
* Long-pressing a mute or solo button now pops up a menu where you can choose to deactivate all mute or solo buttons.
* Added an option 'Show navigation bar' which can be disabled to get more screen space on devices with a virtual button bar.
* When exporting stems with the 'Append track name' option enabled, exported tracks with the same name would be overwritten. Solved.
version 5.0.4.7
posted on 2021-03-21
* When importing a MIDI file in a non-empty project, a duplicate tempo/time sig marker could be placed at 0:00, possibly causing other MIDI clips to be stretched. Solved.
* Solved issue with the Zoom Am7 and Samsung headphones adapter.
* Long-pressing an empty space on a track when in Edit mode with the Multi-selection button enabled no longer pops up the track menu.
* Editing clip volume for MIDI clips in Scroll/Edit mode didn't work. Solved.
and more..
version 5.0.4.6
posted on 2021-02-22
* Solved a problem with the Blue Yeti 10th anniversary.
* Solved a problem at start-up for Android 11 devices.
version 5.0.4.3
posted on 2021-02-17
* Added DSF Basses to the soundfont shop
* Fix for AKG Lyra USB mic
* MIDI PC event at the start of a track was always exported as channel 0. Solved.
* Improved sound quality of Evolution One when disabling 'High quality'.
* Notes played on a (virtual) keyboard would cut off when playing in a loop. Solved.
* Undo-ing a single moved note in the piano roll editor didn't work. Solved.
* Solved a crash related to clearing automation events.
and more..
version 5.0.3.3
posted on 2020-12-12
* Added an option to the 'Other' section in the settings to disable previewing of soundfont presets for live situations.
* USB audio/MIDI fix.
version 5.0.3.1
posted on 2020-12-06
* 5.0.3.1: USB MIDI fix
* Multi-channel WAV/FLAC files containing more than 2 channels can now be imported and split into mono tracks.
* The MIDI velocity is now drawn inside notes in the piano roll editor.
* Metronome volume did not work when at least one tempo marker was present. Solved.
* Solved an issue with hanging notes when playing a USB MIDI keyboard.
* After replacing an effect on the grid, the app could crash later on. Solved.
and more...
version 5.0.3.2
posted on 2020-12-06
* Solved an issue with hanging notes when playing a USB MIDI keyboard.
* Solved an issue with certain BOSS devices not working correctly.
* The vertical zoom of the piano roll could jump when zooming. Solved.
version 5.0.2.1
posted on 2020-11-12
* The split button behavior can now be set in the settings and now defaults to the V4 behavior
* Modifiers are now saved with presets
* The app would crash if enabling count-in for the metronome in combination with multiple tempo markers. Solved.
* Solved an issue with zooming in the drum pattern editor
* Solved a random crash when using the Flanger
* Solved a crash that could happen when adding an effect to an empty track and importing a stereo file on that track
and more bug fixes..
version 5.0.1.9
posted on 2020-10-05
* Added a pop-up menu to the Arm button with options to Arm or Disarm all audio tracks when using a multi-channel USB audio interface.
* The pitch bend of Evolution One is now reset when starting playback.
* Channel pressure and Pitch bend events are now drawn more clear in the piano roll.
* Solved 'Recording failed' issue when using a multi-channel USB audio interface (like the XR18) with 'Optimize CPU usage' enabled.
* Solved crash on start-up for the Amlogic GTKing.
and more..
version 5.0.1.8
posted on 2020-09-20
* Added 'Quantize' option to pop-up menu when tapping on selected notes in the piano roll editor.
* Solved issue with quantization in combination with tempo/time signature changes.
* 'Save to audio file' did not produce correct results when selecting mp3 as format on a mono audio clip. Solved.
version 5.0.1.7
posted on 2020-09-07
* Improved compatibility with Motorola devices.
* The app would crash when changing an Fx Send output during playback. Solved.
version 5.0.1.6
posted on 2020-08-26
* Solved undo/redo problem with recorded automation events.
* Solved a crash on Android 7.1 that could occur when displaying a short message when leaving or re-entering the app.
* The piano roll editor view was not updated when selecting a control change number to edit. Solved.
* The pitch bend and mod wheel events were not recorded in Evolution One. Solved.
version 5.0.1.3
posted on 2020-08-14
Please see the release notes in the app for the full list of changes!
5.0.1: Bug fixes
5.0: This is a huge update! Some highlights:
* Virtual analog synthesizer 'Evolution One' based on the popular Synth One from AudioKit
* The effects section has been completely redesigned: place an unlimited number of effects on a grid, use the second row to create parallel effect paths
* Compressor sidechain
* Tempo and time signature change
* Vocal Tune PRO
* Toneboosters V4 Barricade, EQ, ReelBus and Reverb
version 5.0.0.9
posted on 2020-07-17
This is a huge update, please see the release notes in the app:
* Virtual analog synthesizer 'Evolution One' based on the popular Synth One from AudioKit
* The effects section has been completely redesigned: place an unlimited number of effects on a grid, use the second row to create parallel effect paths
* Compressor sidechain
* Tempo and time signature change
* New user interface for easier editing
* Vocal Tune PRO
* Toneboosters V4 Barricade, EQ, ReelBus and Reverb
and much more!
version N/A
posted on 2020-07-15
Bug fix and x86_64 build
version N/A
posted on 2020-01-02
In some situations, after cutting a part of a drum track, the app could give playback failures. Solved.
version N/A
posted on 2019-12-07
After connecting or disconnecting headphones when using Oboe/AAudio, the app would fail to playback. Solved.
version N/A
posted on 2019-11-22
* Solved a problem with http access in newer Android versions.
version N/A
posted on 2019-11-21
* When zoomed out, trim is disabled for small clips, making moving of clips easier.
* Solved white edges around icon on Samsung models.
* Solved issue with Oxygen 8 MIDI keyboard.
version N/A
posted on 2019-11-20
* Using Cut on a MIDI clip could cause a crash. Solved.
* Fixes for IK MultiMedia iRig USB audio interfaces.
version Varies with device
posted on 2019-06-19
* Solved problems running the app on Android 5.x
* Solved a crash that could occur after changing sample rates in a project including active Fx Sends
* Solved an issue where notes from a USB MIDI keyboard could hang
* 'Include effect trails' option now has no effect when mastering a range
version 4.3.1
posted on 2016-12-02
• 7 new soundfonts added to the soundfont shop: Choir Ahhs, Choir Oohs, Mellotron, Orchestral Large Sections Strings, Orchestral Solo Strings, Steinway Grand Piano (over 200MB for 1 piano, multi-layer sampled at 24-bit!), and Taurus Bass Pedals. Check out the demo mp3's in the shop.,• The instrument selection dialog did not send a note off event when releasing the preset. Solved.,• The Soundfont shop dialog now shows prices in the users's currency.
version 1.8.1
posted on 2013-06-21
Several fixes and updates
